3 x 40' ΗC Container house ≈ 90 m2

Dimensions:

1st level: (L x W X H ) 12.000 mm x 4,890 mm x 2.890 mm

2nd level: (L x W X H ) 12.000 mm x 2,440 mm x 2.890 mm

 

Frame

Welded steel design of sectional bar and 3-5 mm folded sheet steel,freestanding, covered with rust-inhibiting primer and a surface coat of polyurethane paint, in your choice of RAL colours; 8 ISO container corners for handling. Stackable in twos, according to stress analysis

Floor composition

Blind floor: 0.5 mm zinc-coated profiled sheet riveted to the floor's cross support

Insulation: Insulation wool, flammability class A1, per EN 13 162

Vapour block: 0.2 mm vapour block - polyethylene sheet

Floor boards: 22 mm V100 particle board, E1 formaldehyde free, per EN 309, bolted to the steel floor support, joints filled and sanded, underlain with U-profile.

Floor covering: 1.4 mm PVC floor covering Fatra Domo , laid in strips that are glued to the entire floor surface, fused joints, colour is mixed grey. The joints between the floor and walls are clad with baseboards approx. 60 mm high, white or grey. Permitted floor load: 250 kg/m2 ... higher load limits available per customer request

 

Outside walls composition

Sheathing: 0.55 mm zinc-coated profiled sheet, painted in your choice of RAL colours, depth of trapezoidal wave 10 mm, riveted to zinc-coated U-profile of the wall structure, which is screwed to the steel frame.

Insulation: Insulation wool, flammability class A1, per EN 13 162

Vapour block: 0.2 mm vapour block - polyethylene sheet

Ventilated through slots in the outside walls, on the outer side sheet metal with stamped vents, on the interior side a plastic grille with insect screen. Slots cleaned through PVC tubing an average of 100 mm in diameter.

 

Insulation

Floor: 80 mm insulation wool, k = 0,632 W/qmK

External walls: 60 mm insulation wool, k = 0,667 W/qmK

Internal walls: 60 mm insulation wool, k = 0,574 W/qmK

Roof: 80 mm insulation wool, k = 0,522 W/qmK

 

Roof composition

Profiled sheets: 0.75 mm zinc-coated profiled sheet, depth of trapezoidal sheet 35 mm, ventilated,

screwed to ceiling structure.

Insulation: Insulation wool, flammability class A1, per EN 13 162

Vapour barrier: 0.2 mm vapour block - polyethylene sheet

Permitted roof load: 125 kg/m2 - higher load limits available per customer request

Roof drainage is handled by plastic downspouts an average of 60 mm in diameter, placed in all corner pillars, which are routed from the unit's collection pipes.

 

Internal facing

Roof: 10 mm two-side laminated particle board, per EN 143 22, washable, formaldehyde free, white or pale oak colour, riveted to ceiling structure. The rivet heads are equipped with plastic covers in the same colour as the particle board. All joints, including the corners, are fitted with special plastic mouldings. 

Walls: 10 mm two-side laminated particle board, per EN 143 22, washable, formaldehyde free, white or pale oak colour, riveted to wall structure. The rivet heads are equipped with plastic covers in the same colour as the particle board. All joints, including the corners, are fitted with special plastic mouldings.

Internal walls insulated

 

For more information, please download the  specifications below with photos and drawing.

tecniche di posizionamento sui motori